Make nitric acid - The Complete Guide

We show three ways to nitric acid in two different chemical approaches that are both easily accessible with the materials can be taken. Warning: The procedures in this video, produce large quantities of toxic gases and deal with highly corrosive acids. All work must be performed in a hood with proper protective equipment. And all units must be made of glass to withstand the acids. Nitric acid chemically by injecting nitrogen dioxide is produced in water. Therefore, the objective in this approach is togenerate nitrogen dioxide. This can be prepared by reacting the acid chloride, a nitrate and copper are performed. Around 80grams of sodium nitrate, about 30 grams of copper and 100 ml of hydrochloric acid (37% 12M), the quantities are needed. The exact amount is not critical. For concentrations of profits, the amount of water that can be converted to small, about 20-50ml. Each source of nitrate is used with potassium nitrate, ammonium nitrate fertilizer, too. You can use our previousVideo-on test for nitrates, if you determine if you want to use. www.youtube.com The hard part is now the main gas in water. Two approaches can be seen in the video. In the first approach, three containers, such as the windows are held together, forcing the gases to enter the water. This is very inefficient, but it is very easy to do. The best way is to use the gas from the generator through a tube and into a refrigerated container with water. The water, converted into...